Skip to content
Wireless Bluetooth headphones offer unrivaled convenience and flexibility over wired ones. With the right equipment and some instructions, connecting them to your cell phone is a breeze.
In this article, we'll use the Runner 4 as an example, describing the steps it takes to connect to your phone, as well as some helpful tips to ensure a consistent and smooth Bluetooth connection.
Step-by-step guide to pairing the Runner 4 with your phone's Bluetooth
1. Place the headphone in pairing mode.
- Turn on the headphone
- Press and hold the power button for 3 seconds
- Blue light blinks
- Enter Bluetooth mode pairing
2. Prepare your phone.
- Open “Settings” on your phone
- Turn on Bluetooth in Settings
- Find “Nank Runner4”, click to connect
- The voice prompts to complete the connection
Solving Common Problems When Pairing Bluetooth with Phones
If you have tried the above steps but still can't use your wireless headphone with your phone, you can try the following methods to solve the problem.
Step 1. Try some basic fixes
Reboot devices: Turn off your phone and headset completely. Wait about a minute, then turn it back on
Check the battery level: A low battery can cause unexpected connection problems.
Be aware of distance: Bluetooth typically works within 30 feet, but walls and obstacles can narrow this range. Keep devices closer together, especially during the initial pairing process.
Step 2. How to Fix Connection Problems
Reset Pairing: If you have previously connected to someone else's phone, then when your headphone is turned on, it is automatically matched to someone else's phone. You can turn on the Bluetooth of someone else's phone and select “Forget” or “Unpair”. This will delete all previous connection data and allow you to start the pairing process again.
Check Pairing Mode: Nank headphones have a specific way to enter pairing mode, for different headphones you can check the manual for the correct procedure (Runner4 requires you to keep pressing the switch for 3 seconds until the blue light blinks to enter the pairing state)
Single Device Connection: Nank headphones can only connect to one device at a time. Make sure your headphone is not already connected to another device such as a tablet or laptop.
Restore Factory Settings: Nank Bluetooth headphones have a Restore Factory Settings program. This will clear all paired devices and restore the default settings. Runner 4 With the headphone turned on, tap the on/off button 5 times consecutively, if the blue light stays on for two seconds that means it has successfully restored the factory settings.
Step 3. How to Avoid Interference Problems
WiFi Distance: Both WiFi and Bluetooth operate at 2.4GHz, which can cause signal interference. Therefore, it's best to keep your headset away from WiFi routers.
Electronic interference: Microwave ovens, cordless phones, and even fluorescent lights can interfere with Bluetooth. Identify and stay away from potential sources of interference.
Device management: Too many Bluetooth devices in the same area may cause interference. Please turn off Bluetooth for infrequently used devices.
Conclusion
In conclusion, the steps to connect a Nank Bluetooth headphone to your phone may vary per product, but the operation is simple and easy to follow. Follow the step-by-step guide and troubleshooting tips above and you can start listening to your favorite music, podcasts, or audio books without having to worry about tangled wires. If you're looking for some great Bluetooth headphones, be sure to check out our selection of Nank headphones - they offer unrivaled sound quality and durability at an affordable price.
FAQ
Why can't my phone detect my headset pairing?
Your Android phone may not be able to detect your headset due to Bluetooth not being enabled, the headset not being in pairing mode, outdated software, interference from a nearby device, or conflicts caused by a previously paired device. Please make sure the settings are correct, reset the headset, and then try reconnecting to fix the problem.
How to use the magnetic charger correctly?
Because magnetic charging has positive and negative poles corresponding, so mutual adsorption can be normal charging, mutual repulsion can not be charged as well as cause a short circuit, so do not force the magnetic adsorption fit contact.
